ROV2-3000
SERIES ROV · OPZV (TUBULAR GEL)The best of lead. Maintenance-free with extreme service life.
The ROV2-3000 is a 2 V, 3000 Ah (10-hour rate) OPzV lead-acid battery from the Rekoser OPzV (Tubular Gel) series. It measures 576 × 212 × 772 mm and weighs 210 kg, with F10 terminals. It stores 6 kWh and delivers up to 4000 A. The best of lead. Maintenance-free with extreme service life. Typical applications: Solar/Wind Energy Systems, Electrical Substations, Telecommunications and Base Stations and Railway Signaling and Infrastructure.
Formerly RKV2-3000.
Main Advantages
- Combination: Tubular plates with gel electrolyte
- Maintenance: Zero maintenance required
- Durability: 20 years design life at 20ºC
- Install: Can be installed horizontally in racks
| Nominal Voltage | 2 V |
|---|---|
| Capacity (25ºC) | 3000 Ah (C10) |
| Energy | 6000 Wh |
| Weight | 210 kg |
| Terminal | F10 |
| Dimensions | 576 × 212 × 772 mm |
Main Applications
Quality Standards
ROV2-3000
OPZV (TUBULAR GEL)Graphics (25°C)
Constant Discharge Ratings (A) at 25ºC
| F.V / Time | 10MIN | 15MIN | 30MIN | 1HR | 3HR | 5HR | 10HR |
|---|---|---|---|---|---|---|---|
| 1.90 V | 1062A | 1033A | 965A | 815A | 588A | 435A | 257A |
| 1.85 V | 1665A | 1525A | 1312A | 1038A | 697A | 503A | 283A |
| 1.80 V | 2171A | 1969A | 1587A | 1261A | 772A | 525A | 300A |
| 1.75 V | 2302A | 2162A | 1862A | 1373A | 794A | 535A | 303A |
| 1.70 V | 2504A | 2374A | 2046A | 1450A | 809A | 544A | 309A |
Constant Discharge Ratings (W) at 25ºC
| F.V / Time | 10MIN | 15MIN | 30MIN | 1HR | 3HR | 5HR | 10HR |
|---|---|---|---|---|---|---|---|
| 1.90 V | 2051W | 1999W | 1879W | 1599W | 1171W | 872W | 520W |
| 1.85 V | 3110W | 2860W | 2481W | 1981W | 1358W | 989W | 560W |
| 1.80 V | 3950W | 3600W | 2929W | 2352W | 1473W | 1010W | 573W |
| 1.75 V | 4121W | 3891W | 3387W | 2524W | 1491W | 1016W | 583W |
| 1.70 V | 4422W | 4214W | 3670W | 2632W | 1502W | 1022W | 590W |
ROV2-3000
OPZV (TUBULAR GEL)Specifications
| Nominal Voltage | 2 V |
|---|---|
| Capacity (25ºC) | 3000 Ah (C10) |
| Energy | 6000 Wh |
| Cell number | 1 |
| Charge Voltage (25°C) | Cycle use: 2.35-2.40V (-5mV/ºC/cell) Float use: 2.25-2.29V (-3mV/ºC/cell) |
| Max. Charge Current | 600 A |
| Max. Discharge Current | 4000 A |
| Internal Resistance | 0.31 mΩ |
| Self Discharge | 2 % of capacity per month at 20 °C |
| Capacity Affected by Temperature | 40 °C: 102 %, 25 °C: 100 %, 0 °C: 85 %, -15 °C: 65 % |
Construction
| Component | Material |
|---|---|
| Container | ABS(UL94-V0 optional) |
| Cover | ABS (Flame Retardant Optional) |
| Electrolyte | Immobilized Gel |
| Negative | Lead |
| Positive | Lead dioxide |
| Safety Valve | Rubber |
| Sealant | Epoxy Resin |
| Separator | Fibre Glass |
| Terminal | Copper |
ROV2-3000
OPZV (TUBULAR GEL)Quick Installation Guide
To ensure optimal performance and maximize the lifespan of your REKOSER ROV2-3000 battery, follow these assembly and connection guidelines.
1. Space and Dimension Verification
Before proceeding, ensure the receptacle or cabinet of your equipment complies with the unit's physical measurements:
- Length: 576 mm
- Width: 212 mm
- Height: 772 mm
- Total Height: 807 mm
- Weight: 210 kg
2. Terminal Configuration (F10)
- Terminals: Ensure your system's connectors match the F10 type to prevent electrical arcing.
- Polarity: Check the positive and negative markings on the battery before connecting, to prevent short circuits.
3. Charge Parameters
- Cycle use: 2.35-2.40V (-5mV/ºC/cell)
- Float use: 2.25-2.29V (-3mV/ºC/cell)
4. Safety and Storage
Maintenance: Immobilised gel and tubular plate: sealed, no water topping up.
Position: Upright, or horizontal on a rack.
Charging: Keep to the stated charge voltage: gel is sensitive to overcharging.
Storage: Store charged, in a cool and dry place, and recharge periodically.
Nearby models
ROV2-2500 (2 V · 2500 Ah) · ROV2-3500 (2 V · 3500 Ah) · See all ROV series models