ROV2-100
SERIES ROV · OPZV (TUBULAR GEL)The best of lead. Maintenance-free with extreme service life.
The ROV2-100 is a 2 V, 100 Ah (10-hour rate) OPzV lead-acid battery from the Rekoser OPzV (Tubular Gel) series. It measures 103 × 206 × 354 mm and weighs 13 kg, with F10 terminals. It stores 200 Wh and delivers up to 800 A. The best of lead. Maintenance-free with extreme service life. Typical applications: Solar/Wind Energy Systems, Electrical Substations, Telecommunications and Base Stations and Railway Signaling and Infrastructure.
Formerly RKV2-100.
Main Advantages
- Combination: Tubular plates with gel electrolyte
- Maintenance: Zero maintenance required
- Durability: 20 years design life at 20ºC
- Install: Can be installed horizontally in racks
| Nominal Voltage | 2 V |
|---|---|
| Capacity (25ºC) | 100 Ah (C10) |
| Energy | 200 Wh |
| Weight | 13 kg |
| Terminal | F10 |
| Dimensions | 103 × 206 × 354 mm |
Main Applications
Quality Standards
ROV2-100
OPZV (TUBULAR GEL)Graphics (25°C)
Constant Discharge Ratings (A) at 25ºC
| F.V / Time | 15MIN | 30MIN | 1HR | 3HR | 5HR | 10HR |
|---|---|---|---|---|---|---|
| 1.70 V | 125A | 86A | 55.5A | 25.5A | 17.3A | 10.5A |
| 1.75 V | 114A | 82.4A | 55A | 25A | 17A | 10.3A |
| 1.80 V | 101A | 76.8A | 51A | 24A | 16.8A | 10A |
| 1.85 V | 87.4A | 68.4A | 46.8A | 22.5A | 15.9A | 9.5A |
| 1.90 V | 73.8A | 60A | 42.5A | 21A | 15A | 9A |
Constant Discharge Ratings (W) at 25ºC
| F.V / Time | 15MIN | 30MIN | 1HR | 3HR | 5HR | 10HR |
|---|---|---|---|---|---|---|
| 1.70 V | 208W | 148W | 117W | 50.2W | 37.8W | 21.5W |
| 1.75 V | 184W | 144W | 106W | 50.1W | 36.9W | 20.1W |
| 1.80 V | 163W | 138W | 96.9W | 49.5W | 36W | 19.9W |
| 1.85 V | 150W | 124W | 91.9W | 47.9W | 34.8W | 19.1W |
| 1.90 V | 138W | 110W | 86.9W | 46.3W | 33.5W | 18.2W |
ROV2-100
OPZV (TUBULAR GEL)Specifications
| Nominal Voltage | 2 V |
|---|---|
| Capacity (25ºC) | 100 Ah (C10) |
| Energy | 200 Wh |
| Cell number | 1 |
| Charge Voltage (25°C) | Cycle use: 2.35-2.40V (-5mV/ºC/cell) Float use: 2.25-2.29V (-3mV/ºC/cell) |
| Max. Charge Current | 20 A |
| Max. Discharge Current | 800 A |
| Internal Resistance | 0.31 mΩ |
| Self Discharge | 2 % of capacity per month at 20 °C |
| Capacity Affected by Temperature | 40 °C: 102 %, 25 °C: 100 %, 0 °C: 85 %, -15 °C: 65 % |
Construction
| Component | Material |
|---|---|
| Container | ABS(UL94-V0 optional) |
| Cover | ABS (Flame Retardant Optional) |
| Electrolyte | Immobilized Gel |
| Negative | Lead |
| Positive | Lead dioxide |
| Safety Valve | Rubber |
| Sealant | Epoxy Resin |
| Separator | Fibre Glass |
| Terminal | Copper |
ROV2-100
OPZV (TUBULAR GEL)Quick Installation Guide
To ensure optimal performance and maximize the lifespan of your REKOSER ROV2-100 battery, follow these assembly and connection guidelines.
1. Space and Dimension Verification
Before proceeding, ensure the receptacle or cabinet of your equipment complies with the unit's physical measurements:
- Length: 103 mm
- Width: 206 mm
- Height: 354 mm
- Total Height: 390 mm
- Weight: 13 kg
2. Terminal Configuration (F10)
- Terminals: Ensure your system's connectors match the F10 type to prevent electrical arcing.
- Polarity: Check the positive and negative markings on the battery before connecting, to prevent short circuits.
3. Charge Parameters
- Cycle use: 2.35-2.40V (-5mV/ºC/cell)
- Float use: 2.25-2.29V (-3mV/ºC/cell)
4. Safety and Storage
Maintenance: Immobilised gel and tubular plate: sealed, no water topping up.
Position: Upright, or horizontal on a rack.
Charging: Keep to the stated charge voltage: gel is sensitive to overcharging.
Storage: Store charged, in a cool and dry place, and recharge periodically.
Nearby models
ROV2-150 (2 V · 150 Ah) · See all ROV series models